W5500 function parameters (AC and DC characteristics and power consumption, etc.)

The W5500 is an all-hardware TCP/IP embedded Ethernet controller that provides an easier Internet connection solution for embedded systems. The W5500 integrates the TCP/IP stack, 10/100M Ethernet data link layer (MAC) and physical layer (PHY), enabling users to extend network connectivity in their applications using a single chip.

The market-proven WIZnet full hardware TCP/IP stack supports TCP, UDP, IPv4, ICMP, ARP, IGMP and PPPoE protocols. The W5500 embeds a 32K byte on-chip cache for Ethernet packet processing. If you use the W5500, you only need some simple Socket programming to implement an Ethernet application. This will be faster and easier than other embedded Ethernet solutions. Users can use 8 hardware Sockets for independent communication at the same time.

The W5500 provides an SPI (Peripheral Serial Interface) to make it easier to integrate with peripheral MCUs. Moreover, the W5500 uses a new high-efficiency SPI protocol to support 80MHz speed, which enables better high-speed network communication. To reduce system power consumption, the W5500 provides Wake-on-Wall (WOL) and power-down modes for customers to choose from.

W5500 absolute maximum rating

W5500 function parameters (AC and DC characteristics and power consumption, etc.)

　　 Note: Permanent damage may occur if the device is loaded above the 'absolute maximum rating'.

　　 W5500 absolute maximum rating (electrical sensitivity)

1, electrostatic discharge

W5500 function parameters (AC and DC characteristics and power consumption, etc.)

2, static lock

W5500 data sheet _w5500 main parameters

W5500 DC characteristics

W5500 function parameters (AC and DC characteristics and power consumption, etc.)

W5500 power consumption

(Test environment: VDD=3.3V, AVDD=3.3V, Ta = 25°C)

W5500 function parameters (AC and DC characteristics and power consumption, etc.)

W5500 AC characteristics

1, reset the clock

W5500 function parameters (AC and DC characteristics and power consumption, etc.)
W5500 function parameters (AC and DC characteristics and power consumption, etc.)

2, wake up time

The wake-up time of the rectifier is: 10us.

3, crystal characteristics

W5500 function parameters (AC and DC characteristics and power consumption, etc.)

4, SPI clock

W5500 function parameters (AC and DC characteristics and power consumption, etc.)
W5500 function parameters (AC and DC characteristics and power consumption, etc.)

5, transformer characteristics

W5500 function parameters (AC and DC characteristics and power consumption, etc.)
W5500 function parameters (AC and DC characteristics and power consumption, etc.)

6, polarity transformation

The MDIX W5500 does not support the automatic polarity change function. Therefore, users need to connect to a switch or router using a straight-through cable and connect to a terminal device (such as a server, workstation, or other W5500) using a crossover cable. However, the user can use any type of network cable to connect to other devices with automatic polarity switching. The corresponding interface automatically corrects incorrect wiring.

Electric Bell

DIN Electric Bell

The electric bell is suitable for audible signaling for intermittent use only in domestic and commercial installations.We are manufacturer of Low Voltage Electrical in China, if you want to buy Electric Bell,Patent Intermittent Electric Bell, please contact us.

Korlen electrical appliances also produces other low voltage electric appliances, for example, overload protector which can do over-current & short circuit protection. The overload protector is popular at customers.

Low Voltage Electrical,Electric Bell,Patent Intermittent Electric Bell

Wenzhou Korlen Electric Appliances Co., Ltd. , https://www.zjaccontactor.com