Unconsciously, my series of photography roads has come to the third.
The first one, as an opening, I showed my view of photography
The second article wrote some of my own shutter lines
The second of the roads that I used in the years of the shutters of tiu's photographs are: ########################################################################################################################### The first tomato blue purple Bluetooth shutter 2016 I opened a series that is to say my road to photography, opened a chat about my eyes. Photograph 1 in my eyes : #Photography of people chasing light #tiu Photographs of photography in my eyes Part 1 : #Photography of people chasing light #tiu Photograph of people chasing light #tiu See this essay, when conceiving the original article... tiu-| Likes 15 Comments 23 Favorites 93 View Details The third article I want to write about a problem I encountered before and the final diy solution.
As a person who claims to play photography, there is always a question of friends around me asking me for a camera. As early as 3-5 years ago, I started recommending micro-vouchers for ordinary family friends. Now it is almost recommended to all non-professional friends. Because of the use of ordinary households (traveling, recording children's growth), micro-ports that are lightweight but not inferior in quality are sufficient.
I personally understand that only SLRs are better than micro ones.
1, watching professional
2, more extensive accessories such as lenses, flash, filters, etc.
In recent years, apart from traveling long distances, I have always used micro shots. I discovered that even the image quality of the nex5C many years ago was acceptable.
At the moment, my highest usage rate is sony a7. As the first-generation full-frame micro-single, a7 is definitely an epoch-making product, and the follow-up 2 generations have been greatly improved and reinforced. According to my friend who works at Sony, there is a qualitative difference between focus and image stabilization.
For my own use, a7 is very good, but it is slightly inferior to the SLR in terms of startup and evf aspects and parameter settings. The others are basically no problem.
However, after using it for a while, I encountered a very annoying problem: a7 often prompts no camera, which makes it impossible to shoot. Can only be turned off, re-install the lens can be resolved. This is very embarrassing.
Gathering together with Changan Pinya Luneng - SMZDM Xi'an's first large-scale gathering documentary Since the end of 2014, after entering Aunt Zhang, out-of-box drying sheets have become my lifestyle, and daily sign-in is also on time than work. Compared to the preferential information, I actually like to see many of the original zdm's people, with little business perspectives and experience. So after seeing the news that the zdm Xi’an branch was established, he applied for joining without hesitation. After a small amount of WeChat interviews, even after becoming an interviewer in Xi’an, even more flattered tiu-| Likes 37 Comments 114 Favourites 32 View Details I asked a lot of my friends have not been resolved, until Xi'an Friendship Group appeared @ Tang fat to thin this sony Dafa Xi'an agent, I learned that this problem is a common problem of sony a7, in a sense It is said that the a7 generation is only a pilot product and is not perfect in many places. Although the surface of the lens clip is metal but the bottom layer is plastic, it is prone to loosening over time, causing the contacts to come loose and unable to shoot. The original factory returned to the factory can only replace the buckle, but the material is still plastic, the richest man has a third-party manufacturer's own all-metal buckle, you can do it yourself. Can completely solve the problem.
In the search for the richest family, there are indeed many, and the price is not expensive. Hundred and ten dollars to get.
A7 Metal Mount _ Taobao Search Taobao search is the most intelligent commodity search engine, through the operation of big data, accurate understanding of goods and users, providing accurate personalized search experience. Direct links to s.taobao.com Originally wanted to replace it after sale, but it wasn't too much trouble to decide.
The product comes with a screwdriver, but also strengthened my own diy confidence.
Family portrait: 1, watch screwdriver, full metal snap 3, plastic cover (to prevent screws from falling into cmos) and 4 new screws 
The first step: remove the lens of a7 and expose the chrysanthemum 
Step 2: Press the screwdriver at right angles and loosen the screws 
Step 3: Remove the original first layer metal buckle and the second layer of plastic buckle 
All metal snaps play. 
Remove the buckle a7, a little ambiguous 
On the left is the full metal buckle, on the right is the original two-layer buckle 
The last step: Put on the plastic protection cover and screw it. 
The whole process takes about 30 minutes or so, in fact, a friend with a little hands-on ability can do it. During the process, take care not to drop the screws onto the cmos. Actually, the supplied screwdriver is magnetic and generally does not allow the screws to fall.
The process of replacement is as simple as that.
We must strongly condemn sony Dafa here. Such a simple process and such a low cost should start a recall or replacement service. Even if it is a point cost, I think it is acceptable. But sony is silent and really is not kind. To know that all the a7 II replaced all metal snaps, there is no such problem.
I hope to give all a7 users a reminder, but also to a friend to prepare to buy a7 wake up, it is recommended to buy more mature second-generation products.
commercial time:
The good friends of Xi'an noticed that the Xi'an branch was established in November 2016. Please do not enter the group quickly. Within the group I will organize many online and offline activities.
The main program of the Xi'an Railway Station recruits friends and dear friends. Dear Valued Friends, Hello everyone, the double eleventh is over. Are you still with your hands? Do not be afraid of the end of the embarrassment, as soon as possible to join the master plan, you have a variety of money savers to help you detoxify all kinds of goods, including your next year double eleven few handfuls. The ninth station will be set up in Xi'an. Xi'an's friends and pickpockets will have come to your doorstep. Don't worry about investing in Aunt Zhang's arms! The bottom of this article is attached to the Nanjing å‰é¢åŸºå›žé¡¾æŸ¥åŠ and each of the å‰ä¸»ç¾¤ Sign up for the link 赞 33 3333 详情 详情Single core armored cable
Standard: IEC 60502
Rated Voltage: 0.6/1kV
AWA (Aluminium Wire Armour)
SSWA ( Stainless Steel Wire Armour)
Sheath/Jacket: PVC (Polyvinyl-Chloride)
Applications: Armoured Cable for power networks, industrial plants, switch-boards, underground and in cable ducting where better mechanical protection is required.
Single Core Armored Cable,Types Of Armoured Cable,Single Core Wire,Armored Cable Power
Shenzhen Bendakang Cables Holding Co., Ltd , https://www.bdkcables.com