Jerry high and low temperature damp heat aging test chamber quarterly maintenance project details - Database & Sql Blog Articles

The detailed maintenance items of Jerry's high and low temperature damp heat aging test chamber are as follows:

First, the electrical part:

1

Clean the dust on the switchboard. Do not touch the water.

2

, tighten the thick wire diameter, high current screw terminal.

3

Check the circulating fan fixing screws of the high and low temperature damp heat aging test chamber to prevent loosening in long-term operation.

4

Observe large current contactors and circuit breakers

(

Control compressors, fans

)

Is there any discoloration or scorch marks?

)

If it is replaced in time.

Second, the frozen part:

1

Regular cleaning

(

Every three months

)

Condenser, so as to avoid the ambient temperature of the small constant temperature and humidity chamber exceeds

30

The machine overheats the alarm.

2

When the high and low temperature damp heat aging test chamber is not used for a long period of time,

2

Week start compressor

1

Times, each time

1

Around.

3

Forbidden at low temperatures

(0

Below

)

Stop the machine to avoid air leakage and frosting on the equipment door.

4

The compressor noise is normal and dull and stable. If abnormal sounds such as sharp ears are heard, the manufacturer should be notified immediately.

Third, the waterway part:

1

Regularly clean the small constant temperature and humidity tank water tank to avoid scaling and cause abnormal humidification. Check if the automatic watering is smooth.

2

Keep the inside of the box clean and do not block foreign matter from the water return to avoid water accumulation in the equipment during the experiment.

3

The humidification tank should be cleaned every month to check whether the water inlet is unblocked and avoid dry burning and damage the humidification pipe.

4

High and low temperature damp heat aging test box manufacturers recommend changing the wet cloth every three months.

Shenzhen Jerry Test Equipment Co., Ltd. is a professional enterprise integrating scientific research, design and manufacture of various types of simulated environmental test equipment. The company continues to explore in the competition, constantly surpassing, from small to large, from weak to strong. The main products are high and low temperature damp heat aging test chamber, high and low temperature alternating heat and humidity test chamber, high and low temperature alternating heat and humidity test chamber, high and low temperature impact test chamber, constant temperature and humidity test chamber, temperature and humidity test chamber, xenon lamp aging test machine, ultraviolet light. Aging test chamber, etc.