Concrete mixer maintenance - Huaqiang Electronic Network

Single chip microcomputer STM32L151CCU6

Brand AVX TPSE226M035R0125 Low impedance tantalum capacitor AVX 22

Electronic scale crystal oscillator 3.2*2.5mm 3225 16M (16.000MHZ) 12PF 10PPM 20PPM 30PPM

LC03-3.3 SOP8 TVS Static Protection 3.3V

Quzhou Zhisheng Test Instrument Factory recommends to you that one of the products that our factory has developed and put into operation first in China.

,

Our factory is equipped with excellent after-sales service with exquisite craftsmanship.

”

Selling in the domestic market for decades

,

After years of hard work, Zhangzhou Zhisheng Test Instrument Factory has become the preferred supplier of major scientific research units, schools and enterprise users.

Maintenance and repair:

1

The bearing components are regularly lubricated according to the use conditions, and the gearbox lubrication is referred to the product manual.

2

Regularly check the sealing condition of the machine and find that there is a leaking place to check the quality of the gasket in time.

3

Always check the sturdiness of the shovel and tighten it if it is loose.

4

Always check the electrical control system for good contact and dryness.

5

After the mixer is used for a long time, the shovel and the mixing drum should be worn and adjusted or replaced according to the wear condition.

6

Do not insert your hands and sticks into the tube during mixing to avoid danger.

After-sales commitment

1

. Under the normal conditions of storage, transportation, maintenance and use of the customer, if the product cannot be used normally due to the quality of the product,

"

Five packs

:

Warranty, return, replacement, delivery, package disassembly

"

service. The product warranty period is usually one year, and the warranty can be extended according to user needs.

2

. When receiving feedback on quality information, we will quickly process the opinions, or rush to the scene to deal with the problem, after normal operation, analyze the reasons and clarify the responsibility.

3

. The instrument factory provides necessary technical documents and product ex-factory certificate and other related documents for the products to be shipped.

4

. Provide spare parts, spare parts and installation, commissioning, maintenance services and technical training to relevant personnel in a timely manner according to customer needs or agreements.