The whole machine is getting smaller and smaller, frequency resources become more and more crowded, and high-performance filters appear to be particularly important. With the rapid development of wireless communications and wireless access, frequency resources become more and more crowded, and the protection intervals between different communication system frequency bands become greater. The smaller it comes. On the one hand, this imposes more stringent requirements on the spectrum and power of the transmitting end of each system, ensuring that the transmitted signals have a high linearity and cannot increase the transmit power arbitrarily to increase the communication distance or reliability.
At the same time, the environment at the receiving end is worse, especially for smaller and smaller mobile products, the interference increases, and the improvement of receiving sensitivity and anti-interference must be enhanced. Especially in the 2.4GHz band, there are ISM, Bluetooth, WiFi, WiMAX and other protocol services. In order to ensure that each system works normally and does not affect each other, it is indispensable that each system receive front-end with high-performance filters. In this way, it can achieve low in-band insertion loss, large out-of-band attenuation, and high selectivity, and the receiver will not block the receiver channel due to the adjacent band transmitter (eg, LTE band 40, 2300-2400 MHz) (eg, WiFi, 2400-2482 MHz. ). It is worth pointing out that the ISM (Industrial, Scientific, Medical) use of wireless services for frequency applications is not subject to filing (filing), which further increases the unpredictability of interference sources.
The small size and high performance of the FBAR filter well meet the requirements of handheld mobile devices. The main specifications of the filter are: selectivity (Q value), insertion loss, temperature characteristics, and power consumption. The three main filters are: ceramic filters, SAW (SAW filter) and FABR. Table 1 compares the performance of the three filters:
Ceramic filter can withstand large power, good temperature characteristics, but low Q, large volume;
The SAW filter has low power, poor temperature characteristics and low Q value. The appropriate application frequency band is about 2GHz.
FBAR compared to SAW filter: Q is one order of magnitude higher, the operating frequency can be as high as 10GHz, and the temperature characteristics are good, and the withstand power is greater than. Low insertion loss, less heat generation, extended battery life, high ESD rating >200V.
Avago's FBAR products, the world's leading analog and mixed-signal semiconductor company, have been widely used in mobile phone filters, duplexers, RF front-ends, and PGS receiving front-end modules, fully demonstrating that its technology and mass production are already very mature. .
AVAGO FBAR products, using microcap wafer (wafer) package, small size, distribution parameters, stable performance, cost-effective, easy to install, application prospects. AVAGO ACPF-7025, 2496–2690MHz, 2W bandpass filter measures 12.5x2.5x1.15 mm, which can fully meet the requirements of mobile products such as mobile phones.
Table 1: Comparison of AVAGO FBAR and SAW ceramic filter performance
Future communications handsets, data cards, wireless access WiMAX/LTE voice communications, and WiFi/Bluetooth data communications will realize coexistence and complementary functions, exert their respective capabilities, and will not interfere with each other.
FBAR filter fully considers the application environment
FBAR's excellent filter performance combined with microcap package, 50ohm input and output termination, provides a great choice for the rapid design of high-performance mobile phones and mobile devices, while Anwar's high stable quality and huge production capacity provide customers with powerful protection.
Recently, AVAGO based on FBAR technology, for the 2.4GHz band of mobile phones and mobile wireless products, introduced WiFi/Bluetooth band-pass filter - ACPF-7024, and WiMAX band-pass filter - ACPF-7025, its performance indicators such as Table 2.
Table 2: Main performance of FBAR bandpass filter in 2.4GHz band
It can be seen from Table 2 that the ACPF-7024, 2400-2482MHz WiFi/Bluetooth band-pass filter has small insertion loss and good selectivity. There is a high out-of-band rejection of WiMAX, PCS, and LTE band7,40 in the adjacent bands. Indicators shown in Figure 1
Figure 1: ACPF-7024 Out-of-band attenuation 2350-2550 MHz
ACPF-7025, 2496 – 2690MHz WiMAX bandpass filter with low insertion loss and good selectivity. There is a high out-of-band rejection of WiFi/Bluetooth, PCS, 800MHz cells in adjacent bands. Implementing WiMAX transceivers and WiFi/Bluetooth transceivers can work simultaneously without affecting each other. Application see Figure 2
In addition, Avago Technologies recently introduced a mini-duplexer AGPS-C001 for mobile applications, effectively separating W-CDMA/GSM transceiving signals and GPS/GNSS (Galileo) navigation signals, while sharing one antenna for both. The loss of one antenna means cost savings and increased design flexibility. See Figure 3.
Figure 3: AGPS-C001 Block Diagram
AGPS-C001 is the masterpiece of FBAR technology: excellent isolation, low insertion loss and high selectivity, making GPS/GNSS and W-CDMA work “harmoniously†without reducing the performance of either side due to mutual interference; Operating temperature range is wide, -30 °C - 80 °C; volume is 2.0 x 2.0 x 0.95, less than 1mm thick, suitable for surface mount technology, indicators shown in Figure 4,5. Using this product to design a mobile phone with navigation function, the internet card becomes more convenient and the product performance is more stable.
Figure 4: AGPS-C001 Antenna - GPS Attenuation
Figure 5: AGPS-C001 Antenna - Mobile Phone Attenuation
For the above solutions and products, Avago's Asia Pacific largest distributor Shiqiang Telecom will be equipped with a dedicated RF technical support team to provide users with various technical support and product advisory services.
Figure 2: Typical multi-system block diagram
ZGARVAPE
Zgar 2021's latest electronic cigarette Aurora series uses high-tech temperature control, food grade disposable pod device and high-quality material.Compared with the old model, The smoke of the Aurora series is more delicate and the taste is more realistic ,bigger battery capacity and longer battery life. And it's smaller and more exquisite. A new design of gradient our disposable vape is impressive. We equipped with breathing lights in the vape pen and pod, you will become the most eye-catching person in the party with our atomizer device vape.
The 2021 Aurora series has upgraded the magnetic suction connection, plug and use. We also upgrade to type-C interface for charging faster. We have developed various flavors for Aurora series, Aurora E-cigarette Cartridge is loved by the majority of consumers for its gorgeous and changeable color changes, especially at night or in the dark. Up to 10 flavors provide consumers with more choices. What's more, a set of talking packaging is specially designed for it, which makes it more interesting in all kinds of scenes. Our vape pen and pod are matched with all the brands on the market. You can use other brand's vape pen with our vape pod. Aurora series, the first choice for professional users!
We offer low price, high quality Disposable E-Cigarette Vape Pen,Electronic Cigarettes Empty Vape Pen, E-cigarette Cartridge,Disposable Vape,E-cigarette Accessories,Disposable Vape Pen,Disposable Pod device,Vape Pods OEM vape pen,OEM electronic cigarette OEM e-cigarette OEM e-cig to all over the world.
ZGAR 1.0 E-Cigarette Vape Pen,ZGAR 1.0 Disposable Device Vape,ZGAR Vape Pen Device 1.0 Atomizer,ZGAR Vape Device 1.0 Disposable E-Cigarette OEM vape pen,ZGAR Vape Device 1.0 electronic cigarette
ZGAR INTERNATIONAL(HK)CO., LIMITED , https://www.szdisposable-vape.com