USB2.0 AM TO TYPE C, Â Quick Charge Cable.
Data transmission standard: 480M/s.
Load current: 2A max.
Cable withstanding Voltage:Â 100VAC/DC min.
Voltage Drop: 0.3V max. for VBUS; 0.2V max. for GND
we accept customized products.Including custom customer Logo, wire material, length, current load etc.
Cable has been certified by UL.Â
***********************************************************************************************************
Question: what is voltage drop?
Answer: The voltage drop of the cable is the phenomenon that the voltage generated by the power is reduced after a distance of the cable transmission.The reason for the voltage drop is that the cable has resistance.
Question: what is the effect of the volage drop?
Answer:Â The smaller the volage drop, the larger the charging power.The intuitive performance is that the charging speed is faster under the same conditions.
Flexibility test
Test Equipment: Swing tester
Test conditions:±60°/3000cycles@45cycles per 1minute,Weight is 200g.Â
PRODUCT SPECIFICATION:
NO. | Item | Test Condition | Requirement |
1 | Insulation Resistance | Insert the wire connector electrical measuring machine corresponding to the test fixture,Temperature:25ºC ,Relative humidity:80%RH |
10MΩ(Min) |
2 | Cable Assembly Voltage Drop |
Insert the wire connector electrical measuring machine corresponding to the test fixture,Temperature:25ºC ,Relative humidity:80%RH |
250 mV max for GND and 400 mV max for VBUS |
3 | Cable Conduction impedance |
Insert the wire connector electrical measuring machine corresponding to the test fixture,Current 1mA,Temperature:25ºC ,Relative humidity:80%RH |
3Ω(Max) |
4 | Withstanding Voltage | Insert the wire connector electrical measuring machine corresponding to the test fixture,electric voltage 100VAC/DC Temperature:25ºC ,Relative humidity:80%RH |
No Breakdown,No damage |
5 | Contact Resistance | Mate connectors, Measure by dry circuit,20mV Max,100mA |
TYPE C 40mΩ/UAB AM 30mΩ(Max) Max change delta +10mΩ |
6 | Flexibility test | ±90°/2000cycles@10cycles per 1minute,Weight is 200g | NO Electrical NG,NO damage |
7 | Load test | 5kgf for axis force test | NO Electrical NG,NO damage |
8 | Mating/Un-mating Force test | TYPE C Nsertion force:5~20N Withdrawal force:8~20N; USB AM Nsertion force:35N Max Withdrawal force:10N Min | NO Electrical NG,NO damage |
9 | Durability | TYPE C Mated and unmated connectors up to 10000 cycles at a minimum rate of 200cycles per hours,mating force 5~20N ; unmating force 8~20N .  USB AM Mated and unmated connectors up to 3000 cycles at a minimum rate of 200cycles per hours,mating force 35N Max; |
NO Electrical NG,NO damage |
10 | Humidity Test | Temperature:65±2ºC,Relative Humidity:90%,Duration:96 hours Upon completion of the test,specimens shall be conditioned at ambient room conditions for 96 hours |
NO Electrical NG,NO damage |
11 | Salt mist spray | humidity:95-98%(R.H.); Temperature:35±2ºC;time:24hours; PH Value:6.5-7.2. 5%salt solution |
NO Electrical NG,NO damage |
12 | Thermal shock | Mate Cable together and perform the test as follows. 10 cycle of: A)-55ºC for 30 minutes; B)+85ºC for 30 minutes |
NO Electrical NG,NO damage |
13 | Low temperature test | The cable is exposed to -40ºC atmosphere for 96 hours. After testing it shall be left alone for 1 to 2 hours in room ambient |
NO Electrical NG,NO damage |
14 | Heat test | The cable is exposed to 85ºC atmosphere for 96 hours. After testing it shall be left alone for 1 to 2 hours in room ambient. |
NO Electrical NG,NO damage |
PalConn Technology Overview
Company Found 2003
1400+ Employees.
PT is a leading global integrated interconnect  Â
components provider of : Â
-- Mobile Phone , IT, Consumer, Medical, Automotive Industrial, Customer made, etc. Â Â
USB 2 0&3 0&3 1 Type C .0&3.0&3.1 Type C, RJM, SATA HDMI Audio Jacks DC Jacks Battery , HDMI, Audio Jacks, DC Jacks, Battery,SD Card, WTB, Metal part, HDMI Cables. USB 3.1 Cables, USB 2.0 & 3.0
Cable, RCA Cables, DP Cables, AGV Cables, RJ Cables
Â
PalConn Technology Milestones
2003: Shenzhen Factory Founded.
2006: Â ISO 9001:2008 Certified.
2009: Â ISO 14001:2004 Certified.
2009: Taiwan sales Office Established.
2013: Guizhou Factory
2015: TS16949 Certified.
2016: ISO 13485 Certified.
2017:QC08000:2012 Certified.
2017: IPC Certified.
Major Product Series Distribution
Â
Product |
Product Series |
Business Percentage |
CABLE |
HDMIÂ Cable |
18% |
Type C cable |
13% |
|
DPÂ &Â VGAÂ &Â AVÂ cable |
9% |
|
RJÂ cable |
6% |
|
Automotive cable |
5% |
|
Medical cable |
4% |
|
Industrial Cable |
4% |
|
Others |
1% |
|
CONNECTOR |
USBÂ 2.0Â &Â 3.0Â CONNECTOR |
12% |
USB Type C 3.1 CONNECTOR |
10% |
|
SIM&SD&MICROÂ SDÂ CARDS |
5% |
|
JACKÂ CONNECTOR |
4% |
|
RJÂ Connector |
5% |
|
HDMIÂ CONNECTOR |
3% |
|
Others |
1% |
Customer |
Percentage |
3C |
80% |
Medical |
8% |
Automobile |
5% |
Industry |
2% |
Others |
5% |
Â
USB2.0 AM TO TYPE C, Â Quick Charge Cable.
Data transmission standard: 480M/s.
Load current: 2A max.
Cable withstanding Voltage:Â 100VAC/DC min.
Voltage Drop: 0.3V max. for VBUS; 0.2V max. for GND
we accept customized products.Including custom customer Logo, wire material, length, current load etc.
Cable has been certified by UL.Â
***********************************************************************************************************
Question: what is voltage drop?
Answer: The voltage drop of the cable is the phenomenon that the voltage generated by the power is reduced after a distance of the cable transmission.The reason for the voltage drop is that the cable has resistance.
Question: what is the effect of the volage drop?
Answer:Â The smaller the volage drop, the larger the charging power.The intuitive performance is that the charging speed is faster under the same conditions.
Flexibility test
Test Equipment: Swing tester
Test conditions:±60°/3000cycles@45cycles per 1minute,Weight is 200g.Â
PRODUCT SPECIFICATION:
NO. | Item | Test Condition | Requirement |
1 | Insulation Resistance | Insert the wire connector electrical measuring machine corresponding to the test fixture,Temperature:25ºC ,Relative humidity:80%RH |
10MΩ(Min) |
2 | Cable Assembly Voltage Drop |
Insert the wire connector electrical measuring machine corresponding to the test fixture,Temperature:25ºC ,Relative humidity:80%RH |
250 mV max for GND and 400 mV max for VBUS |
3 | Cable Conduction impedance |
Insert the wire connector electrical measuring machine corresponding to the test fixture,Current 1mA,Temperature:25ºC ,Relative humidity:80%RH |
3Ω(Max) |
4 | Withstanding Voltage | Insert the wire connector electrical measuring machine corresponding to the test fixture,electric voltage 100VAC/DC Temperature:25ºC ,Relative humidity:80%RH |
No Breakdown,No damage |
5 | Contact Resistance | Mate connectors, Measure by dry circuit,20mV Max,100mA |
TYPE C 40mΩ/UAB AM 30mΩ(Max) Max change delta +10mΩ |
6 | Flexibility test | ±90°/2000cycles@10cycles per 1minute,Weight is 200g | NO Electrical NG,NO damage |
7 | Load test | 5kgf for axis force test | NO Electrical NG,NO damage |
8 | Mating/Un-mating Force test | TYPE C Nsertion force:5~20N Withdrawal force:8~20N; USB AM Nsertion force:35N Max Withdrawal force:10N Min | NO Electrical NG,NO damage |
9 | Durability | TYPE C Mated and unmated connectors up to 10000 cycles at a minimum rate of 200cycles per hours,mating force 5~20N ; unmating force 8~20N .  USB AM Mated and unmated connectors up to 3000 cycles at a minimum rate of 200cycles per hours,mating force 35N Max; |
NO Electrical NG,NO damage |
10 | Humidity Test | Temperature:65±2ºC,Relative Humidity:90%,Duration:96 hours Upon completion of the test,specimens shall be conditioned at ambient room conditions for 96 hours |
NO Electrical NG,NO damage |
11 | Salt mist spray | humidity:95-98%(R.H.); Temperature:35±2ºC;time:24hours; PH Value:6.5-7.2. 5%salt solution |
NO Electrical NG,NO damage |
12 | Thermal shock | Mate Cable together and perform the test as follows. 10 cycle of: A)-55ºC for 30 minutes; B)+85ºC for 30 minutes |
NO Electrical NG,NO damage |
13 | Low temperature test | The cable is exposed to -40ºC atmosphere for 96 hours. After testing it shall be left alone for 1 to 2 hours in room ambient |
NO Electrical NG,NO damage |
14 | Heat test | The cable is exposed to 85ºC atmosphere for 96 hours. After testing it shall be left alone for 1 to 2 hours in room ambient. |
NO Electrical NG,NO damage |
PalConn Technology Overview
Company Found 2003
1400+ Employees.
PT is a leading global integrated interconnect  Â
components provider of : Â
-- Mobile Phone , IT, Consumer, Medical, Automotive Industrial, Customer made, etc. Â Â
USB 2 0&3 0&3 1 Type C .0&3.0&3.1 Type C, RJM, SATA HDMI Audio Jacks DC Jacks Battery , HDMI, Audio Jacks, DC Jacks, Battery,SD Card, WTB, Metal part, HDMI Cables. USB 3.1 Cables, USB 2.0 & 3.0
Cable, RCA Cables, DP Cables, AGV Cables, RJ Cables
Â
PalConn Technology Milestones
2003: Shenzhen Factory Founded.
2006: Â ISO 9001:2008 Certified.
2009: Â ISO 14001:2004 Certified.
2009: Taiwan sales Office Established.
2013: Guizhou Factory
2015: TS16949 Certified.
2016: ISO 13485 Certified.
2017:QC08000:2012 Certified.
2017: IPC Certified.
Major Product Series Distribution
Â
Product |
Product Series |
Business Percentage |
CABLE |
HDMIÂ Cable |
18% |
Type C cable |
13% |
|
DPÂ &Â VGAÂ &Â AVÂ cable |
9% |
|
RJÂ cable |
6% |
|
Automotive cable |
5% |
|
Medical cable |
4% |
|
Industrial Cable |
4% |
|
Others |
1% |
|
CONNECTOR |
USBÂ 2.0Â &Â 3.0Â CONNECTOR |
12% |
USB Type C 3.1 CONNECTOR |
10% |
|
SIM&SD&MICROÂ SDÂ CARDS |
5% |
|
JACKÂ CONNECTOR |
4% |
|
RJÂ Connector |
5% |
|
HDMIÂ CONNECTOR |
3% |
|
Others |
1% |
Customer |
Percentage |
3C |
80% |
Medical |
8% |
Automobile |
5% |
Industry |
2% |
Others |
5% |
Â
NINGBO LOUD&CLEAR ELECTRONICS CO.,LIMITED , https://www.loudclearaudio.com