Underground 0.6KV 1KV PVC Insulated Power Cable

Steve Wei  Sales Manager
 
 
 
 
Underground 0.6KV 1KV PVC Insulated Power Cable
Application:
Distribution and signal power cable for static outdoor application (with protection against direct UV-irradiation), in ground, in water, within facilities, in cable canals, in concrete, in conditions where heavier mechanical loads and specially tensile strains, are not expected. Used in electric power plants, transformer stations, industrial plants, metropolitan networks and in other electric plants, same as for connection of signalling devices in industry, traffic and similar.

Standards:
IEC 60502-1

Construction:
Conductor:Cu, class 1 or 2 acc. to HRN HD 383 / IEC 60228 / DIN VDE 0295
class 1:solid, round(RE) or sector (SE)
class 2:multi wire stranded, round (RM) or sector (SM),
             multi wire exceeding 50 mm² are compacted
Insulation:PVC
Filler: extruded elastomer or plastomer compound or wrapped thermoplastic tapes
Sheath:PVC
Sheath Color: Black

Technical Data:
Temperature Range
during installation:-5 °C up to +50 °C
fixed installed:-30 °C up to +70 °C
at short circuit of max. 5 s:up to 160 °C
Nominal Voltage:Uο/U = 0,6/1 kV
Test Voltage: 4kV
Max. Operating Voltage In Three-phase System:1,2 kV
Max. Tensile Strength: 50 N/mm²
Behaviour In Fire:IEC 60332-1
Minimal Inner Bending Radius:
single core:  15D
multi core:   12D

Core QTY: 
1C,2C 3C, 3C+2C, 4C+1C
Nominal Cross-section Area (mm²)Range:
1.5  2.4 4 6 10 16 25 35 50 70 95 120 150 185 240 300 500 500 630




Steve Wei  Sales Manager
 
 
  Steve Wei  Sales Manager
 
 
 
 
Underground 0.6KV 1KV PVC Insulated Power Cable
Application:
Distribution and signal power cable for static outdoor application (with protection against direct UV-irradiation), in ground, in water, within facilities, in cable canals, in concrete, in conditions where heavier mechanical loads and specially tensile strains, are not expected. Used in electric power plants, transformer stations, industrial plants, metropolitan networks and in other electric plants, same as for connection of signalling devices in industry, traffic and similar.

Standards:
IEC 60502-1

Construction:
Conductor:Cu, class 1 or 2 acc. to HRN HD 383 / IEC 60228 / DIN VDE 0295
class 1:solid, round(RE) or sector (SE)
class 2:multi wire stranded, round (RM) or sector (SM),
             multi wire exceeding 50 mm² are compacted
Insulation:PVC
Filler: extruded elastomer or plastomer compound or wrapped thermoplastic tapes
Sheath:PVC
Sheath Color: Black

Technical Data:
Temperature Range
during installation:-5 °C up to +50 °C
fixed installed:-30 °C up to +70 °C
at short circuit of max. 5 s:up to 160 °C
Nominal Voltage:Uο/U = 0,6/1 kV
Test Voltage: 4kV
Max. Operating Voltage In Three-phase System:1,2 kV
Max. Tensile Strength: 50 N/mm²
Behaviour In Fire:IEC 60332-1
Minimal Inner Bending Radius:
single core:  15D
multi core:   12D

Core QTY: 
1C,2C 3C, 3C+2C, 4C+1C
Nominal Cross-section Area (mm²)Range:
1.5  2.4 4 6 10 16 25 35 50 70 95 120 150 185 240 300 500 500 630




Steve Wei  Sales Manager
 
 
 

Chlorinated Polyethylene Tape

Chlorinated Polyethylene Tape is also called CPE tape.

CPE plastic bag, it is made of high density polyethylene (HDPE) by chlorination substitution reaction of polymer material, not high temperature resistance, according to the structure and use of different, chlorinated polyethylene can be divided into resin chlorinated polyethylene (CPE) and elastic type of chlorinated polyethylene (CM) two categories. Thermoplastic resin can be used alone, but also with polyvinyl chloride (PVC), polyethylene (PE), polypropylene (PP), polystyrene (PS), ABS and other resins and even polyurethane (PU) blends.

CPE plastic bag, it is made of high density polyethylene (HDPE) by chlorination substitution reaction of polymer material, high temperature resistance.

It is translucent milky white, is made of high density polyethylene by chlorination substitution reaction of polymer material, feel more soft, not easy to deformation, aging resistance, not easy to wear.

Waterproof Electrical Tape HB1505 is a kind of Chlorinated Polyethylene Tape whitch has double layer,made from elasticity insulation materials and waterproof mastic.Overload temperature can reach 100℃ max.

Together with other Electrical Tapes,Special Adhesiveand and Insulating Tape,become our best-selling products.

Chlorinated Polyethylene Tape,Water Proof Tape,Waterproof Electrical Tape,Waterproof Sealing Tape

CAS Applied Chemistry Materials Co.,Ltd. , https://www.casac1997.com