New SCR T8 20W Dimmable 4ft 3528 2835 SMD LED Tube Light

New SCR T8 20W Dimmable 4ft 3528 2835 SMD LED tube light


Discription:

SCR dimming LED tube Product Description
1. No touch switches, to fast turn off and turns on by knobs switch.
2. The brightness of LED tube can be adjusted from 0% to 100% by knobs switch according to your demands.
3. Small size, high efficiency, good stability, reliable work, and so on.
4. High sensitivity, strong reliability, and widely used in homes, offices, workbench etc.
5. The lengths of SCR dimming LED tube are available 0.6meter (9W), 0.9meter (13W), 1.2meter (18W). When the LED tube is working on 100% brightness, the 9W LED tube lumen is 900-1200lm, 13W LED tube lumen is 1300-1600lm, and 18W LED tube lumen is 1800-2000lm.


Installation:
1. Standard installation
Connect directly to AC power, this is the most energy saving model
2. Repalcing installation
If there's a starter on the old fluorescent light fixture, remove the starter
3. Remove electronic ballast
If there's no starter on the fluorescent light fixture, remove the electronics ballast

Benefits of LED Tube Light:

1) Solid-state, high shock / vibration resistant
2) No RF interference, No buzzing noise
3) No fluorescent flickering
4) No hazard of mercury or lead entering the environment
5) No danger of broken glass
6) Maintenance free, easy installation
7) Long lifetime 50, 000+ hrs (5+ years)
8) Low power consumption, high intensity
9)LED driver: Removable, isolated
10)T8 tube light passes UL/CE/TUV

Applications of LED Tube Light:

1) Bus, shuttle, railcar passenger interiors
2) Uninterrupted emergency lighting
3) Focused reading and Task lighting
4) Interior design uses
5) Closet illumination
6) Cove lighting
7) Marine recreation applications
8) Concealed accent lighting
9) Edge lighting
10) Under counter lighting
11) Cubicle, workbench lighting
12) Recreational vehicle interiors. New SCR T8 20W Dimmable 4ft 3528 2835 SMD LED tube light


Discription:

SCR dimming LED tube Product Description
1. No touch switches, to fast turn off and turns on by knobs switch.
2. The brightness of LED tube can be adjusted from 0% to 100% by knobs switch according to your demands.
3. Small size, high efficiency, good stability, reliable work, and so on.
4. High sensitivity, strong reliability, and widely used in homes, offices, workbench etc.
5. The lengths of SCR dimming LED tube are available 0.6meter (9W), 0.9meter (13W), 1.2meter (18W). When the LED tube is working on 100% brightness, the 9W LED tube lumen is 900-1200lm, 13W LED tube lumen is 1300-1600lm, and 18W LED tube lumen is 1800-2000lm.


Installation:
1. Standard installation
Connect directly to AC power, this is the most energy saving model
2. Repalcing installation
If there's a starter on the old fluorescent light fixture, remove the starter
3. Remove electronic ballast
If there's no starter on the fluorescent light fixture, remove the electronics ballast

Benefits of LED Tube Light:

1) Solid-state, high shock / vibration resistant
2) No RF interference, No buzzing noise
3) No fluorescent flickering
4) No hazard of mercury or lead entering the environment
5) No danger of broken glass
6) Maintenance free, easy installation
7) Long lifetime 50, 000+ hrs (5+ years)
8) Low power consumption, high intensity
9)LED driver: Removable, isolated
10)T8 tube light passes UL/CE/TUV

Applications of LED Tube Light:

1) Bus, shuttle, railcar passenger interiors
2) Uninterrupted emergency lighting
3) Focused reading and Task lighting
4) Interior design uses
5) Closet illumination
6) Cove lighting
7) Marine recreation applications
8) Concealed accent lighting
9) Edge lighting
10) Under counter lighting
11) Cubicle, workbench lighting
12) Recreational vehicle interiors.

High Frequency PCB
High frequency PCB also called HF PCB.The RF frequency range is typically from 500 MHz to 2 GHz, and designs above 100 MHz are considered RF. The microwave frequency range is anything above 2 GHz. There`s a considerable difference between RF and microwave circuits versus typical digital and analog circuits. In essence, RF signals are very high frequency analog signals. Therefore, unlike digital, at any point in time an RF signal can be at any voltage and current level between minimum and maximum limits. We have much experience in this filed,up to 60 GHz PCB we made.

1.Made of special Resin system material with Low ER and Low loss factor

2.Hybrid Build up mix of FR4 with Low loss material
3.Tight Impedance control
4.Used in Automotive, Radar, CAR to CAR communication, Distance Assistance, Active Drive Systems
We say high frequency ,also like RF PCB and Microwave PCB as they are special material too,not usual FR4 .We have Taconic,Rogers,F4B,F4BM.PTFE material in stock.With this,we can do your special boards quick turn.Unlike other suppliers need long time to purchase material. 

RF PCB

RF PCB,RF Electronic PCB,RF Design PCB,Specialize Flex RF PCB

Storm Circuit Technology Ltd , http://www.stormpcb.com